PCIE 2 XSER 1 X PAR LOW PROFILE

Interface: RS-232 and IEEE1284
Controller: SUNIX SUN2410 (16C950 UART Compatible)
Bus: PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO: Assigned by System
SERIAL COMMUNICATION

Interface: RS-232
No. of Port: 2-port
FIFO: 128 byte (Hardware)
Signal: DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate: 50 bps to 115.2 Kbps
Data bit: 5,6,7,8
Stop bit: 1,1.5,2
Parity: None, Even, Odd, Space, Mark
Flow Control: None, Xon / Xoff, RTS / CTS
Protection:
± 15KV ESD protection for each signal Human Body Model (HBM)
± 15KV IEC1000-4-2 Air Gap Discharge
± 8KV IEC1000-4-2 Contact Discharge
PCB connector: DB44 Female
Cable Connector: DB9 Male
PARALLEL COMMUNICATION

Interface: IEEE1284
No. of Port: 1-port
FIFO: 16 byte (Hardware)
Signal: SPP / ECP / EPP / BPP
Speed: Maximum 1.8MBps
PCB connector: DB44 Female
Cable Connector: DB25 Female
DRIVER SUPPORT

Microsoft Client: Windows XP / Vista / 7 (X86 / X64)
Microsoft Server: Windows 2000 / 2003 / 2008 (X86 / X64)
Microsoft Embedded: Windows XP Embedded / POS Ready 2009 / Embedded System 2009 / Embedded Standard 7
Linux: Linux 2.4.x / 2.6.x / 3.x
DOS: DOS

Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 (X86 / X64)
Microsoft Server: 2000 / 2003 / 2008 (X86 / X64)

DIMENSION

PCB Dimension: 92 x 69mm
Bracket: Low Profile 80mm
Bracket Space: 1
Note:

*LPT port does not support LPT Key Locker Parallel device.
*LPT port does not support legacy 278 / 378 / 3BC ISA address under Microsoft Windows nor Linux operation systems.
*ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.